Infrastructure

Complete machine list

Published in full, with capacity and application for every machine. If your vendor-registration pack needs this as a formatted document, ask and we will send it.

Press shop

35 power presses spanning 20 to 250 tonnes, running progressive, deep-draw and trim tooling built in our own tool room.

35 machines

Machine	Qty	Capacity	Specification & application
Power Press — 20 Tonne	5	20 tonnes	Capacity 20 T Frame type C-frame / pillar type Tooling Progressive, deep-draw & trim dies (in-house) Runs small precision parts, clips and retainers economically.
Power Press — 30 Tonne	2	30 tonnes	Capacity 30 T Frame type C-frame / pillar type Tooling Progressive, deep-draw & trim dies (in-house) General forming and blanking capacity.
Power Press — 50 Tonne	10	50 tonnes	Capacity 50 T Frame type C-frame / pillar type Tooling Progressive, deep-draw & trim dies (in-house) Highest-utilisation tonnage on the floor, covering most mid-range bracket and panel work.
Power Press — 75 Tonne	4	75 tonnes	Capacity 75 T Frame type C-frame / pillar type Tooling Progressive, deep-draw & trim dies (in-house) General forming and blanking capacity.
Power Press — 100 Tonne	4	100 tonnes	Capacity 100 T Frame type C-frame / pillar type Tooling Progressive, deep-draw & trim dies (in-house) General forming and blanking capacity.
Power Press — 150 Tonne	6	150 tonnes	Capacity 150 T Frame type C-frame / pillar type Tooling Progressive, deep-draw & trim dies (in-house) General forming and blanking capacity.
Power Press — 250 Tonne	4	250 tonnes	Capacity 250 T Frame type H-frame Tooling Progressive, deep-draw & trim dies (in-house) Heaviest capacity on the floor — handles deep draw and heavy forming operations.

Laser cutting

Fibre laser profiling with no tooling requirement — the fastest route from a drawing to a real part.

1 machines

Machine	Qty	Capacity	Specification & application
Fibre Laser Cutting Machine	1	1500 × 3000 mm bed	Working area 1500 × 3000 mm HR steel Up to 25 mm Stainless steel Up to 6 mm Tooling required None Input files DXF, DWG, STEP, PDF Clean, accurate profiles straight off the bed — usually removes a secondary finishing operation.

CNC & machining

Milling, turning and drilling for production components and for tooling work.

3 machines

Machine	Qty	Capacity	Specification & application
Vertical Machining Centre (VMC)	1	1300 × 800 mm envelope	Working envelope 1300 × 800 mm Capability 3-axis milling Applications Production parts & tooling Handles secondary machining on pressed and welded parts as well as finished machined components.
CNC Turning & Drilling	1	Turned & drilled features	Capability Turning & drilling Applications Cylindrical features, bores, tapped holes Supports cylindrical and hole features on production parts and tooling components.
Traub Automatic Lathe Traub	1	Bar turning	Type Automatic bar lathe Applications Turned components from bar stock Used for repetitive turned components and turned features on bar-stock parts.

Welding & special-purpose

Fifteen fixtured welding stations plus dedicated single-purpose machines for high-volume tube operations.

17 machines

Machine	Qty	Capacity	Specification & application
MIG Welding Stations	12	400 A	Rating 400 A Fixturing Dedicated fixtures, built in-house Structural and general joining across sheet and tube, always fixtured for repeatable geometry.
Projection Welding Machines	3	75 kVA	Rating 75 kVA Typical use Nut, stud & small component attachment Consistent, repeatable joints with no consumable weld wire — often cheaper than MIG at volume where the joint allows it.
Special-Purpose Machines (SPM)	2	Flaring + boring	Type Double-head flaring SPM, boring SPM Purpose High-volume tube-end operations Dedicated single-purpose machines that speed high-volume flaring and boring operations on tubular parts.

Tool room

Where our dies, fixtures and gauges are designed, built and maintained — in-house since 2010.

12 machines

Machine	Qty	Capacity	Specification & application
Tool Room VMC (BFW) BFW	1	700 × 1250 mm bed	Bed size 700 × 1250 mm Make BFW Applications Die components, fixture bodies, gauge details The machine behind our in-house die build and maintenance capability.
Surface Grinders	4	—	Applications Die block and punch grinding, flat finishing Four machines let die maintenance run in parallel with new tool build.
Drilling Machines	4	—	Applications Die plates, fixture bases, general drilling
Milling / MTR Machines	2	—	Applications Die and fixture component milling
Lathe	1	—	Applications Turned tooling components, pillars and bushes

Material handling

Safe die changeover on heavier presses and movement of raw material and finished assemblies.

2 machines

Machine	Qty	Capacity	Specification & application
Crane Lifters	2	1 tonne each	Capacity 1 tonne Use Die changes and heavy material handling Safe die changeover on the heavier presses and movement of raw material and finished assemblies.

Power backup

144 kVA of standby generation covering the press shop, laser, welding and machining lines.

2 machines

Machine	Qty	Capacity	Specification & application
Diesel Generator — 82 kVA	1	82 kVA	Rating 82 kVA Coverage Press shop & fabrication
Diesel Generator — 62 kVA	1	62 kVA	Rating 62 kVA Coverage Machining, tool room & inspection Combined 144 kVA of standby generation keeps production running through grid outages.

Measurement & gauging

Inspection equipment

The instruments behind our 100% inspection commitment. Every part is measured against your drawing before it is packed — incoming, in-process and final.

How we inspect

Height gauge Vertical dimension and step measurement from the surface plate
Vernier calliper General internal, external and depth dimensions
Micrometer Close-tolerance thickness and diameter measurement
Dial gauge Runout, flatness and comparative measurement
Thread plug gauge Internal thread go/no-go verification
Thread ring gauge External thread go/no-go verification
Plain plug gauge Hole diameter go/no-go verification
Radius gauge Formed and machined radius confirmation
Filler gauge Gap, clearance and fit assessment
Roughness tester Surface finish measurement against specification
Surface plate Reference datum for layout and height gauging

Capacity questions

Not sure whether your part fits our machines?

Send the drawing with material and thickness. We will confirm against the specific press, laser or machining envelope rather than guess.

Request a quote Contact us